Network topology detection

A Profinet device of class B has the same features as a device class A, plus the support for network topology detection. That allows tools to ask the devices how they are connected, so it is possible to automatically draw a network map. See for example the illustration in the section on the PRONETA tool below.

LLDP

Link Layer Discovery Protocol (LLDP) is used to find information on the closest neighbours on an Ethernet network. Each IO-device, IO-controller and (managed) switch send out frames containing its name and the port name, for each of their Ethernet ports.

LLDP packets should be sent every 5 seconds, and have a time-to-live value of 20 seconds.

Managed switches filter LLDP frames, and send its own LLDP frames. That way everyone can know what is their closest neighbour. Only LLDP frames from the closest neighbour is received on each port, thanks to the filtering done by the switch.

SNMP

It is possible to ask an IO-Controller or IO-device (conformance class B or higher) about its neighbours, using the Simple Network Management Protocol (SNMP).

SNMP agents collect information on individual devices, and the SNMP manager retrieves information from them.

Some of the information can also be queried via the Profinet DCE/RPC protocol.

SNMP versions:

  • v1 Mandatory for Profinet IO-devices and IO-Controllers

  • v2c Supports 64-bit statistical counters

  • v3 Encrypted

Monitor incoming LLDP frames on Linux

This is useful for experimenting with LLDP, but should not be running on the same device as p-net. This is because p-net implements LLDP transmission and reception itself.

Install the lldpd daemon:

$ sudo apt install lldpd

It will start to collect information automatically, but will also start sending LLDP packets on each interface every 30 seconds.

Show neighbour information:

$ lldpcli show neighbors
-------------------------------------------------------------------------------
LLDP neighbors:
-------------------------------------------------------------------------------
Interface:    enp0s31f6, via: LLDP, RID: 1, Time: 0 day, 00:00:26
Chassis:
   ChassisID:    local b
   SysName:      sysName Not Set
   SysDescr:     Siemens, SIMATIC NET, SCALANCE X204IRT, 6GK5 204-0BA00-2BA3, HW: Version 9, FW: Version V05.04.02, SVPL6147920
   MgmtIP:       192.168.0.99
   Capability:   Station, on
Port:
   PortID:       local port-003
   PortDescr:    Siemens, SIMATIC NET, Ethernet Port, X1 P3
   TTL:          20
Unknown TLVs:
   TLV:          OUI: 00,0E,CF, SubType: 1, Len: 20 00,00,01,BC,00,00,00,00,00,00,04,63,00,00,00,00,00,00,00,00
   TLV:          OUI: 00,0E,CF, SubType: 2, Len: 4 00,00,00,00
   TLV:          OUI: 00,0E,CF, SubType: 5, Len: 6 20,87,56,FF,AA,83
-------------------------------------------------------------------------------

To stop the daemon (to avoid sending additional LLDP packets):

sudo systemctl stop lldpd.service
sudo systemctl disable lldpd.service

SNMPwalk tool for querying SNMP agents

To install snmpwalk and standard description files on Ubuntu:

sudo apt install snmp snmp-mibs-downloader

Use snmpwalk to read all info from a device. This is the result when querying a Siemens Profinet-enabled switch:

$ snmpwalk -v2c -c public 192.168.0.99
iso.3.6.1.2.1.1.1.0 = STRING: "Siemens, SIMATIC NET, SCALANCE X204IRT, 6GK5 204-0BA00-2BA3, HW: Version 9, FW: Version V05.04.02, SVPL6147920"
iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.4196.1.1.5.2.5
iso.3.6.1.2.1.1.3.0 = Timeticks: (602966) 1:40:29.66
iso.3.6.1.2.1.1.4.0 = STRING: "sysContact Not Set"
iso.3.6.1.2.1.1.5.0 = STRING: "sysName Not Set"
iso.3.6.1.2.1.1.6.0 = STRING: "sysLocation Not Set"
iso.3.6.1.2.1.1.7.0 = INTEGER: 67
iso.3.6.1.2.1.2.1.0 = INTEGER: 5
iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2
iso.3.6.1.2.1.2.2.1.1.3 = INTEGER: 3
iso.3.6.1.2.1.2.2.1.1.4 = INTEGER: 4
iso.3.6.1.2.1.2.2.1.1.1000 = INTEGER: 1000
iso.3.6.1.2.1.2.2.1.2.1 = STRING: "Siemens, SIMATIC NET, Ethernet Port, X1 P1"
iso.3.6.1.2.1.2.2.1.2.2 = STRING: "Siemens, SIMATIC NET, Ethernet Port, X1 P2"
iso.3.6.1.2.1.2.2.1.2.3 = STRING: "Siemens, SIMATIC NET, Ethernet Port, X1 P3"
iso.3.6.1.2.1.2.2.1.2.4 = STRING: "Siemens, SIMATIC NET, Ethernet Port, X1 P4"
iso.3.6.1.2.1.2.2.1.2.1000 = STRING: "Siemens, SIMATIC NET, internal, X1"
iso.3.6.1.2.1.2.2.1.3.1 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.2 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.3 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.4 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.3.1000 = INTEGER: 6
iso.3.6.1.2.1.2.2.1.4.1 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.2 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.3 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.4 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.4.1000 = INTEGER: 1500
iso.3.6.1.2.1.2.2.1.5.1 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.2 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.3 = Gauge32: 100000000
iso.3.6.1.2.1.2.2.1.5.4 = Gauge32: 10000000
iso.3.6.1.2.1.2.2.1.5.1000 = Gauge32: 0
iso.3.6.1.2.1.2.2.1.6.1 = Hex-STRING: 20 87 56 FF AA 84
iso.3.6.1.2.1.2.2.1.6.2 = Hex-STRING: 20 87 56 FF AA 85
iso.3.6.1.2.1.2.2.1.6.3 = Hex-STRING: 20 87 56 FF AA 86
iso.3.6.1.2.1.2.2.1.6.4 = Hex-STRING: 20 87 56 FF AA 87
iso.3.6.1.2.1.2.2.1.6.1000 = Hex-STRING: 20 87 56 FF AA 83
iso.3.6.1.2.1.2.2.1.7.1 = INTEGER: 1
iso.3.6.1.2.1.2.2.1.7.2 = INTEGER: 1
(etc)

Use the command line argument -v for the SNMP version to use, and -c for the “community string” which is a password. The default community string for devices is often “public”.

The values in the left column are the OID (Object Identifier) values. For example 1.3.6.1.2.1.2.2.1.6.3 is used for the MAC address of the third interface of the device. It can be interpreted as:

  • 1 = iso

  • 3 = identified-organization

  • 6 = dod (US department of defence)

  • 1 = internet

  • 2 = mgmt

  • 1 = mib-2

  • 2 = interfaces

  • 2 = ifTable

  • 1 = ifEntry

  • 6 = ifPhysAddress

  • 3 = Third interface

To convert the digits to human readable text, a MIB (Management Information Base) text file is used.

The example OID is defined in the IF-MIB, which describes interface information. The text is from RFC 2863, and typically installed in /var/lib/snmp/mibs/ietf/IF-MIB on Linux:

ifPhysAddress OBJECT-TYPE
   SYNTAX      PhysAddress
   MAX-ACCESS  read-only
   STATUS      current
   DESCRIPTION
            "The interface's address at its protocol sub-layer.  For
            example, for an 802.x interface, this object normally
            contains a MAC address.  The interface's media-specific MIB
            must define the bit and byte ordering and the format of the
            value of this object.  For interfaces which do not have such
            an address (e.g., a serial line), this object should contain
            an octet string of zero length."
   ::= { ifEntry 6 }

Add the -m ALL flag to snmpwalk to use the installed MIB files. The example line will then display as:

IF-MIB::ifPhysAddress.3 = STRING: 20:87:56:ff:aa:86

instead of the previous:

iso.3.6.1.2.1.2.2.1.6.3 = Hex-STRING: 20 87 56 FF AA 86

To always load specific MIB files, you can add them to a .snmp/snmp.conf configuration file in your home directory. For example:

mibs +LLDP-MIB

Read and write a single OID

Read only the SNMPv2-MIB::sysLocation.0 OID:

$ snmpget -v1 -c public 192.168.0.99 1.3.6.1.2.1.1.6.0
iso.3.6.1.2.1.1.6.0 = STRING: "sysLocation Not Set"

Write a new string describing the device location:

$ snmpset -v1 -c private 192.168.0.99 1.3.6.1.2.1.1.6.0 s "My new location"

Using more MIB files for snmpwalk

Add any additional MIB files in the directory .snmp/mibs/ in your home directory. For Profinet you need at least these files:

  • IEC-62439-2-MGMT-MIB-20140509.mib

  • IEC-62439-2-MON-MIB-20140509.mib

  • LLDP-EXT-IEC61158-TYPE10-MIB.mib

  • LLDP-MIB.my

The first three files are available in the test bundle (in subdirectory PN-Spec) from the Profinet organization.

The last file is available for download on several locations.

Important SNMP subtrees and MIB files

The OID values are hierarchical (arranged in a tree).

OID subtree

Name

1.0.8802.1.1.2

LLDP-MIB::lldpMIB

1.0.62439.1

IEC-62439-2-MIB::mrp

1.3.6.1.2.1

SNMPv2-SMI::mib-2 (default for snmpwalk)

1.3.6.1.4.1.4196.1.1.5.2.100

SNMPv2-SMI::enterprises.4196.1.1.5.2.100 (Siemens Scalance)

1.3.6.1.4.1.4329.6

SNMPv2-SMI::enterprises.4329.6

1.3.6.1.6

SNMPv2-SMI::snmpV2

To convert a numerical OID to a human readable string:

$ snmptranslate -m ALL 1.0.8802.1.1.2.1
LLDP-MIB::lldpObjects

Note that a MIB file can insert entries inside existing subtrees.

Important Profinet-related MIB files:

MIB file

Description

BRIDGE-MIB

For MAC-layer bridges

DISMAN-EXPRESSION-MIB

Distributed Management

IEC-62439-2-MIB

Media Redundancy Protocol

IF-MIB

Interfaces MIB (rfc 2863)

LLDP-EXT-PNO-MIB

Profinet extension of LLDP-MIB

LLDP-MIB

LLDP MIB

RFC1213-MIB

MIB-2

SNMP-USER-BASED-SM-MIB

SNMP User-based Security Model (RFC 3414)

SNMP-VIEW-BASED-ACM-MIB

View-based Access Control Model for SNMP

SNMP-COMMUNITY-MIB

Coexistence between SNMP v1, v2c, v3 (RFC 2576)

SNMP-PROXY-MIB

Parameter config of proxy forwarding (RFC 3413)

SNMP-NOTIFICATION-MIB

Logging SNMP Notifications (RFC 3014)

SNMP-TARGET-MIB

? (RFC 3413)

SNMP-FRAMEWORK-MIB

? (RFC 3411)

SNMPv2-MIB

SNMPv2-SMI

Other Profinet-relevant MIB files on Linux:

  • HOST-RESOURCES-MIB

  • IP-FORWARD-MIB

  • IP-MIB

  • NET-SNMP-AGENT-MIB

  • UDP-MIB

Walking a subtree using snmpwalk

By default the snmpwalk searches the SNMPv2-SMI::mib-2 subtree. You can search a smaller or larger subtree by giving the OID (or the corresponding name) to snmpwalk as the argument after the host argument.

As an example, here are the number of found variables for different subtrees for a Siemens Profinet switch:

OID Subtree

Subtree name

Found variables

1.3.6.1.2.1.2.2.1.6

IF-MIB::ifPhysAddress

5

1.3.6.1.2.1.2.2.1

IF-MIB::ifEntry

110

1.3.6.1.2.1.2.2

IF-MIB::ifTable

110

1.3.6.1.2.1.2

IF-MIB::interfaces

110

1.3.6.1.2.1

SNMPv2-SMI::mib-2 (default for snmpwalk)

408

1.3.6.1.2

SNMPv2-SMI::mgmt

408

1.3.6.1

SNMPv2-SMI::internet

2397

1.3.6

SNMPv2-SMI::dod

2397

1.3

SNMPv2-SMI::org

2397

1

iso

2669

In order to show all available variables when running snmpwalk, use the OID 1. However, in this example this would result in displaying over 2600 variables.

To show relevant data only, you typically need to specify a subtree. This is done by giving the OID value or corresponding name, for example 1.0.8802.1.1.2 or LLDP-MIB::lldpMIB.

Showing SNMP info in tabular format

Some of the OIDs are part of tables, for example the OID 1.3.6.1.2.1.2.2.1.2 which is the ifDescr (descriptive text for Ethernet interface). It is part of the table IF-MIB::ifTable which uses the ifIndex (interface index) as the table index, and the ifIndex is appended to the end of the OID. Thus:

  • 1.3.6.1.2.1.2.2.1.2.1 ifDescr for first interface (actually a port in Profinet naming)

  • 1.3.6.1.2.1.2.2.1.2.2 ifDescr for second interface

  • 1.3.6.1.2.1.2.2.1.2.3 ifDescr for third interface

This SNMP table can also be displayed in a tabular format on the command line (the symbolic name must be given):

snmptable -v1 -c public 192.168.0.50 IF-MIB::ifTable

Add -Cw 120 to the command line to limit the snmptable output line length.

Relevant tables:

Table name

Top OID

IF-MIB::ifTable

1.3.6.1.2.1.2.2

LLDP-MIB::lldpConfigManAddrTable

1.0.8802.1.1.2.1.1.7

LLDP-MIB::lldpLocPortTable

1.0.8802.1.1.2.1.3.7

LLDP-MIB::lldpLocManAddrTable

1.0.8802.1.1.2.1.3.8

LLDP-MIB::lldpRemTable

1.0.8802.1.1.2.1.4.1

LLDP-MIB::lldpRemManAddrTable

1.0.8802.1.1.2.1.4.2

LLDP-EXT-PNO-MIB::lldpXPnoLocTable

1.0.8802.1.1.2.1.5.3791.1.2.1

LLDP-EXT-PNO-MIB::lldpXPnoRemTable

1.0.8802.1.1.2.1.5.3791.1.3.1

Supported SNMP variables for Profinet

Device details:

Field name

Description

sysDescr

String, max 255 char. Consists of product name, serial number, hardware and software versions etc. Also used as SystemIdentification = ChassisID ?

sysObjectId

An OID with enterprise info. Use 1.3.6.1.4.1.24686 for Profinet

sysUpTime

Uptime in 1/100 seconds

sysContact

String, max 255 char. Writable. Contact info to a person.

sysName

String, writable. Fully qualified domain name? Here limited to PNAL_HOSTNAME_MAX_SIZE (typically 64 char).

sysLocation

String, writable. Here same as I&M1 location (max 22 char).

sysServices

78 (dec) for Profinet devices

lldpConfigManAddrPortsTxEnable

On/off for ports. Writable?

Interface statistics, for each port:

Field name

Description

ifIndex

ifDescr

String, max 255 char. Unique within device. See lldpLocPortDesc

ifType

Typically 6 = Ethernet

ifMtu

Max bytes per packet. Often 1500.

ifSpeed

Bits/s. uint32. Often 100000000.

ifPhysAddress

MAC address

ifAdminStatus

Up, down etc. Writable?

ifOperStatus

Up, down etc.

ifInOctets

Input bytes. uint32

ifInDiscards

uint32

ifInErrors

uint32

ifOutOctets

Output bytes. uint32

ifOutDiscards

uint32

ifOutErrors

uint32

Readable fields related to ports and interfaces:

Field

Description

Local interface

Local port

Remote port

ChassisId

Chassis ID (same for all interfaces)

x

x

TimeMark

Timestamp for latest LLDP frame

x

LocalPortNum

Port number

x

x

PortId

String, max 14 char.

x

x

PortIdSubtype

Typically 7 = Locally assigned

x

o

PortDesc

String, max 255 char. See ifDescr.

x

Index

x

ManAddrSubtype

Typically 1=IP

x

x

ManAddr

Management (IP) address

x

x

ManAddrIfId

See ifIndex

x

x

LPDValue

Propagation delay in ns. uint32

x

x

PortTxDValue

Transmission delay in ns. uint32

x

x

PortRxDValue

Reception delay in ns. uint32

x

x

NoS

Station name (or MAC address as string) String

x

x

AutoNegSupported

Autonegotiation supported. Bool.

x

o

AutoNegEnabled

Autonegotiation enabled. Bool.

x

x

AutoNegAdvertisedCap

o

o

OperMauType

MAU type

x

x

Note that some objects are listed “Not accessible” in the standard. These are read indirectly via other objects (used as table index, and appended to the OID of other objects), so the information must thus be available.

See the Profinet standard for the corresponding numerical OID values.

Enable SNMP when running p-net on Linux

See the page “Additional Linux details” in this documentation.

Verification of SNMP communication to p-net

To verify the SNMP capabilities of the p-net stack, first use ping to make sure you have a connection to the device, and then use snmpwalk:

ping 192.168.0.50
snmpwalk -v1 -c public 192.168.0.50 1
snmpget -v1 -c public 192.168.0.50 1.3.6.1.2.1.1.4.0
snmpset -v1 -c private 192.168.0.50 1.3.6.1.2.1.1.4.0 s "My new sys contact"

If you enable debug logging in the p-net stack, the two last commands will cause entries in the p-net log.

This will only be answered if the agent is Profinet-enabled:

snmpget -v1 -c public 192.168.0.50 1.0.8802.1.1.2.1.5.3791.1.2.1.1.1.1

The sysObjectId should be reported as iso.3.6.1.4.1.24686 if the agent is Profinet-enabled:

snmpget -v1 -c public 192.168.0.50 1.3.6.1.2.1.1.2.0

Verification of multiport SNMP functionality for p-net

Ask the device about its neighbours on the different ports by running:

snmpwalk -v1 -c public 192.168.0.50  1.0.8802.1.1.2.1.4.1

This will use the LldpRemTable to show peer ChassisID and peer PortId for the different local ports. Connect some other LLDP-enabled device (Profinet or not) to one of the ports, and verify that it will show up in the results.

A while after disconnecting the device (controlled by the TTL value) the entry will be removed from the list. Verify this behavior for all ports on your device.

Siemens PRONETA - Profinet Network Analysis tool

The Proneta tool can scan the network to discover the topology of connected Profinet equipment.

Download “Proneta Basic” (free version) from the Siemens web page. Unzip the downloaded file onto a Windows personal computer. Double-click the PRONETA.exe file to start the program.

Turn off the ART tester tool before starting Proneta, otherwise Proneta can not scan the network.

On the settings page, select which Ethernet network adapter to use on your computer. On the home screen, select “Network analysis” and use the “Online” tab. Click the “Refresh” icon to scan the network topology. A graphical view with all Profinet equipment will be shown, including the connections between all ports. An example screenshot is shown below.

_images/proneta_example.png

The program will show details about interfaces and ports, and which of the slots that are populated by modules. It will also show the list of current diagnosis for IO-devices. Proneta will read out the diagnostics buffer every 5 seconds, as long as the device is selected in the graphical view. In order to display the diagnostics buffer the IP address of the device must be set. Otherwise the message “Diagnostics buffer not supported” will be shown.

By right-clicking on a device in the graphical view, you can set the station name and IP address (temporarily or permanently). It is also possible to edit the I&M information, to flash the signal LED and to do a factory reset.

For PRONETA to be able to map the connection to the closest device, you need to enable LLDP transmission on the Ethernet interface of your laptop. Note that this interferes with the ART tester software. See the section on installing ART tester in this documentation.

Full SNMP readout example

Here is more data from the Siemens switch, when using the MIBs:

$ snmpwalk -v2c -c public -m ALL 192.168.0.99
SNMPv2-MIB::sysDescr.0 = STRING: Siemens, SIMATIC NET, SCALANCE X204IRT, 6GK5 204-0BA00-2BA3, HW: Version 9, FW: Version V05.04.02, SVPL6147920
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.4196.1.1.5.2.5
DISMAN-EXPRESSION-MIB::sysUpTimeInstance = Timeticks: (756575) 2:06:05.75
SNMPv2-MIB::sysContact.0 = STRING: sysContact Not Set
SNMPv2-MIB::sysName.0 = STRING: sysName Not Set
SNMPv2-MIB::sysLocation.0 = STRING: sysLocation Not Set
SNMPv2-MIB::sysServices.0 = INTEGER: 67
IF-MIB::ifNumber.0 = INTEGER: 5
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifIndex.1000 = INTEGER: 1000
IF-MIB::ifDescr.1 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P1
IF-MIB::ifDescr.2 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P2
IF-MIB::ifDescr.3 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P3
IF-MIB::ifDescr.4 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P4
IF-MIB::ifDescr.1000 = STRING: Siemens, SIMATIC NET, internal, X1
IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.1000 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifMtu.1 = INTEGER: 1500
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1500
IF-MIB::ifMtu.1000 = INTEGER: 1500
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 100000000
IF-MIB::ifSpeed.3 = Gauge32: 100000000
IF-MIB::ifSpeed.4 = Gauge32: 10000000
IF-MIB::ifSpeed.1000 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING: 20:87:56:ff:aa:84
IF-MIB::ifPhysAddress.2 = STRING: 20:87:56:ff:aa:85
IF-MIB::ifPhysAddress.3 = STRING: 20:87:56:ff:aa:86
IF-MIB::ifPhysAddress.4 = STRING: 20:87:56:ff:aa:87
IF-MIB::ifPhysAddress.1000 = STRING: 20:87:56:ff:aa:83
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: up(1)
IF-MIB::ifAdminStatus.3 = INTEGER: up(1)
IF-MIB::ifAdminStatus.4 = INTEGER: up(1)
IF-MIB::ifAdminStatus.1000 = INTEGER: up(1)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: up(1)
IF-MIB::ifOperStatus.3 = INTEGER: up(1)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1000 = INTEGER: up(1)
IF-MIB::ifLastChange.1 = Timeticks: (616788) 1:42:47.88
IF-MIB::ifLastChange.2 = Timeticks: (436359) 1:12:43.59
IF-MIB::ifLastChange.3 = Timeticks: (1094) 0:00:10.94
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.1000 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 908950
IF-MIB::ifInOctets.2 = Counter32: 214915
IF-MIB::ifInOctets.3 = Counter32: 576327
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInOctets.1000 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 911
IF-MIB::ifInUcastPkts.2 = Counter32: 308
IF-MIB::ifInUcastPkts.3 = Counter32: 6185
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1000 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 7840
IF-MIB::ifInNUcastPkts.2 = Counter32: 1521
IF-MIB::ifInNUcastPkts.3 = Counter32: 99
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1000 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 0
IF-MIB::ifInDiscards.3 = Counter32: 0
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInDiscards.1000 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInErrors.1000 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 492
IF-MIB::ifInUnknownProtos.2 = Counter32: 19
IF-MIB::ifInUnknownProtos.3 = Counter32: 21
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1000 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 1516306
IF-MIB::ifOutOctets.2 = Counter32: 596825
IF-MIB::ifOutOctets.3 = Counter32: 2244836
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutOctets.1000 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 5835
IF-MIB::ifOutUcastPkts.2 = Counter32: 385
IF-MIB::ifOutUcastPkts.3 = Counter32: 6649
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1000 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 7470
IF-MIB::ifOutNUcastPkts.2 = Counter32: 5352
IF-MIB::ifOutNUcastPkts.3 = Counter32: 15626
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1000 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutDiscards.1000 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutErrors.1000 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifOutQLen.1000 = Gauge32: 15
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.1000 = OID: SNMPv2-SMI::zeroDotZero
RFC1213-MIB::ipForwarding.0 = INTEGER: not-forwarding(2)
RFC1213-MIB::ipDefaultTTL.0 = INTEGER: 64
RFC1213-MIB::ipInReceives.0 = Counter32: 13017
RFC1213-MIB::ipInHdrErrors.0 = Counter32: 0
RFC1213-MIB::ipInAddrErrors.0 = Counter32: 0
RFC1213-MIB::ipForwDatagrams.0 = Counter32: 0
RFC1213-MIB::ipInUnknownProtos.0 = Counter32: 0
RFC1213-MIB::ipInDiscards.0 = Counter32: 0
RFC1213-MIB::ipInDelivers.0 = Counter32: 13023
RFC1213-MIB::ipOutRequests.0 = Counter32: 13014
RFC1213-MIB::ipOutDiscards.0 = Counter32: 0
RFC1213-MIB::ipOutNoRoutes.0 = Counter32: 0
RFC1213-MIB::ipReasmTimeout.0 = INTEGER: 60
RFC1213-MIB::ipReasmReqds.0 = Counter32: 0
RFC1213-MIB::ipReasmOKs.0 = Counter32: 0
RFC1213-MIB::ipReasmFails.0 = Counter32: 0
RFC1213-MIB::ipFragOKs.0 = Counter32: 0
RFC1213-MIB::ipFragFails.0 = Counter32: 0
RFC1213-MIB::ipFragCreates.0 = Counter32: 0
RFC1213-MIB::ipAdEntAddr.192.168.0.99 = IpAddress: 192.168.0.99
RFC1213-MIB::ipAdEntIfIndex.192.168.0.99 = INTEGER: 1000
RFC1213-MIB::ipAdEntNetMask.192.168.0.99 = IpAddress: 255.255.255.0
RFC1213-MIB::ipAdEntBcastAddr.192.168.0.99 = INTEGER: 1
RFC1213-MIB::ipAdEntReasmMaxSize.192.168.0.99 = INTEGER: 65535
RFC1213-MIB::ipRouteDest.127.0.0.1 = IpAddress: 127.0.0.1
RFC1213-MIB::ipRouteDest.192.168.0.0 = IpAddress: 192.168.0.0
RFC1213-MIB::ipRouteIfIndex.127.0.0.1 = INTEGER: 65535
RFC1213-MIB::ipRouteIfIndex.192.168.0.0 = INTEGER: 65535
RFC1213-MIB::ipRouteMetric1.127.0.0.1 = INTEGER: 0
RFC1213-MIB::ipRouteMetric1.192.168.0.0 = INTEGER: 0
RFC1213-MIB::ipRouteMetric2.127.0.0.1 = INTEGER: 0
RFC1213-MIB::ipRouteMetric2.192.168.0.0 = INTEGER: 0
RFC1213-MIB::ipRouteMetric3.127.0.0.1 = INTEGER: 0
RFC1213-MIB::ipRouteMetric3.192.168.0.0 = INTEGER: 0
RFC1213-MIB::ipRouteMetric4.127.0.0.1 = INTEGER: 0
RFC1213-MIB::ipRouteMetric4.192.168.0.0 = INTEGER: 0
RFC1213-MIB::ipRouteNextHop.127.0.0.1 = IpAddress: 127.0.0.1
RFC1213-MIB::ipRouteNextHop.192.168.0.0 = IpAddress: 192.168.0.99
RFC1213-MIB::ipRouteType.127.0.0.1 = INTEGER: direct(3)
RFC1213-MIB::ipRouteType.192.168.0.0 = INTEGER: direct(3)
RFC1213-MIB::ipRouteProto.127.0.0.1 = INTEGER: local(2)
RFC1213-MIB::ipRouteProto.192.168.0.0 = INTEGER: local(2)
RFC1213-MIB::ipRouteAge.127.0.0.1 = INTEGER: 7563
RFC1213-MIB::ipRouteAge.192.168.0.0 = INTEGER: 7562
RFC1213-MIB::ipRouteMask.127.0.0.1 = IpAddress: 255.255.255.255
RFC1213-MIB::ipRouteMask.192.168.0.0 = IpAddress: 255.255.255.0
RFC1213-MIB::ipRouteMetric5.127.0.0.1 = INTEGER: 0
RFC1213-MIB::ipRouteMetric5.192.168.0.0 = INTEGER: 0
RFC1213-MIB::ipRouteInfo.127.0.0.1 = OID: SNMPv2-SMI::zeroDotZero
RFC1213-MIB::ipRouteInfo.192.168.0.0 = OID: SNMPv2-SMI::zeroDotZero
RFC1213-MIB::ipNetToMediaIfIndex.8.192.168.0.25 = INTEGER: 8
RFC1213-MIB::ipNetToMediaIfIndex.8.192.168.0.50 = INTEGER: 8
RFC1213-MIB::ipNetToMediaPhysAddress.8.192.168.0.25 = Hex-STRING: 1C 39 47 CD D4 EB
RFC1213-MIB::ipNetToMediaPhysAddress.8.192.168.0.50 = Hex-STRING: 54 EE 75 FF 95 A6
RFC1213-MIB::ipNetToMediaNetAddress.8.192.168.0.25 = IpAddress: 192.168.0.25
RFC1213-MIB::ipNetToMediaNetAddress.8.192.168.0.50 = IpAddress: 192.168.0.50
RFC1213-MIB::ipNetToMediaType.8.192.168.0.25 = INTEGER: invalid(2)
RFC1213-MIB::ipNetToMediaType.8.192.168.0.50 = INTEGER: dynamic(3)
RFC1213-MIB::ipRoutingDiscards.0 = Counter32: 0
RFC1213-MIB::icmpInMsgs.0 = Counter32: 0
RFC1213-MIB::icmpInErrors.0 = Counter32: 0
RFC1213-MIB::icmpInDestUnreachs.0 = Counter32: 0
RFC1213-MIB::icmpInTimeExcds.0 = Counter32: 0
RFC1213-MIB::icmpInParmProbs.0 = Counter32: 0
RFC1213-MIB::icmpInSrcQuenchs.0 = Counter32: 0
RFC1213-MIB::icmpInRedirects.0 = Counter32: 0
RFC1213-MIB::icmpInEchos.0 = Counter32: 0
RFC1213-MIB::icmpInEchoReps.0 = Counter32: 0
RFC1213-MIB::icmpInTimestamps.0 = Counter32: 0
RFC1213-MIB::icmpInTimestampReps.0 = Counter32: 0
RFC1213-MIB::icmpInAddrMasks.0 = Counter32: 0
RFC1213-MIB::icmpInAddrMaskReps.0 = Counter32: 0
RFC1213-MIB::icmpOutMsgs.0 = Counter32: 0
RFC1213-MIB::icmpOutErrors.0 = Counter32: 0
RFC1213-MIB::icmpOutDestUnreachs.0 = Counter32: 0
RFC1213-MIB::icmpOutTimeExcds.0 = Counter32: 0
RFC1213-MIB::icmpOutParmProbs.0 = Counter32: 0
RFC1213-MIB::icmpOutSrcQuenchs.0 = Counter32: 0
RFC1213-MIB::icmpOutRedirects.0 = Counter32: 0
RFC1213-MIB::icmpOutEchos.0 = Counter32: 0
RFC1213-MIB::icmpOutEchoReps.0 = Counter32: 0
RFC1213-MIB::icmpOutTimestamps.0 = Counter32: 0
RFC1213-MIB::icmpOutTimestampReps.0 = Counter32: 0
RFC1213-MIB::icmpOutAddrMasks.0 = Counter32: 0
RFC1213-MIB::icmpOutAddrMaskReps.0 = Counter32: 0
RFC1213-MIB::tcpRtoAlgorithm.0 = INTEGER: vanj(4)
RFC1213-MIB::tcpRtoMin.0 = INTEGER: 50000
RFC1213-MIB::tcpRtoMax.0 = INTEGER: 3200000
RFC1213-MIB::tcpMaxConn.0 = INTEGER: -1
RFC1213-MIB::tcpActiveOpens.0 = Counter32: 0
RFC1213-MIB::tcpPassiveOpens.0 = Counter32: 0
RFC1213-MIB::tcpAttemptFails.0 = Counter32: 0
RFC1213-MIB::tcpEstabResets.0 = Counter32: 0
RFC1213-MIB::tcpCurrEstab.0 = Gauge32: 0
RFC1213-MIB::tcpInSegs.0 = Counter32: 0
RFC1213-MIB::tcpOutSegs.0 = Counter32: 0
RFC1213-MIB::tcpRetransSegs.0 = Counter32: 0
RFC1213-MIB::tcpConnState.0.0.0.0.22.0.0.0.0.0 = INTEGER: listen(2)
RFC1213-MIB::tcpConnState.0.0.0.0.23.0.0.0.0.0 = INTEGER: listen(2)
RFC1213-MIB::tcpConnState.0.0.0.0.80.0.0.0.0.0 = INTEGER: listen(2)
RFC1213-MIB::tcpConnState.0.0.0.0.84.0.0.0.0.0 = INTEGER: listen(2)
RFC1213-MIB::tcpConnState.0.0.0.0.443.0.0.0.0.0 = INTEGER: listen(2)
RFC1213-MIB::tcpConnLocalAddress.0.0.0.0.22.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnLocalAddress.0.0.0.0.23.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnLocalAddress.0.0.0.0.80.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnLocalAddress.0.0.0.0.84.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnLocalAddress.0.0.0.0.443.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnLocalPort.0.0.0.0.22.0.0.0.0.0 = INTEGER: 22
RFC1213-MIB::tcpConnLocalPort.0.0.0.0.23.0.0.0.0.0 = INTEGER: 23
RFC1213-MIB::tcpConnLocalPort.0.0.0.0.80.0.0.0.0.0 = INTEGER: 80
RFC1213-MIB::tcpConnLocalPort.0.0.0.0.84.0.0.0.0.0 = INTEGER: 84
RFC1213-MIB::tcpConnLocalPort.0.0.0.0.443.0.0.0.0.0 = INTEGER: 443
RFC1213-MIB::tcpConnRemAddress.0.0.0.0.22.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnRemAddress.0.0.0.0.23.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnRemAddress.0.0.0.0.80.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnRemAddress.0.0.0.0.84.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnRemAddress.0.0.0.0.443.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::tcpConnRemPort.0.0.0.0.22.0.0.0.0.0 = INTEGER: 0
RFC1213-MIB::tcpConnRemPort.0.0.0.0.23.0.0.0.0.0 = INTEGER: 0
RFC1213-MIB::tcpConnRemPort.0.0.0.0.80.0.0.0.0.0 = INTEGER: 0
RFC1213-MIB::tcpConnRemPort.0.0.0.0.84.0.0.0.0.0 = INTEGER: 0
RFC1213-MIB::tcpConnRemPort.0.0.0.0.443.0.0.0.0.0 = INTEGER: 0
RFC1213-MIB::tcpInErrs.0 = Counter32: 0
RFC1213-MIB::tcpOutRsts.0 = Counter32: 0
RFC1213-MIB::udpInDatagrams.0 = Counter32: 13139
RFC1213-MIB::udpNoPorts.0 = Counter32: 0
RFC1213-MIB::udpInErrors.0 = Counter32: 0
RFC1213-MIB::udpOutDatagrams.0 = Counter32: 13132
RFC1213-MIB::udpLocalAddress.0.0.0.0.0 = IpAddress: 0.0.0.0
RFC1213-MIB::udpLocalAddress.0.0.0.0.68 = IpAddress: 0.0.0.0
RFC1213-MIB::udpLocalAddress.0.0.0.0.161 = IpAddress: 0.0.0.0
RFC1213-MIB::udpLocalAddress.0.0.0.0.34964 = IpAddress: 0.0.0.0
RFC1213-MIB::udpLocalAddress.0.0.0.0.49152 = IpAddress: 0.0.0.0
RFC1213-MIB::udpLocalAddress.0.0.0.0.49153 = IpAddress: 0.0.0.0
RFC1213-MIB::udpLocalAddress.127.0.0.1.12345 = IpAddress: 127.0.0.1
RFC1213-MIB::udpLocalAddress.127.0.0.1.12346 = IpAddress: 127.0.0.1
RFC1213-MIB::udpLocalPort.0.0.0.0.0 = INTEGER: 0
RFC1213-MIB::udpLocalPort.0.0.0.0.68 = INTEGER: 68
RFC1213-MIB::udpLocalPort.0.0.0.0.161 = INTEGER: 161
RFC1213-MIB::udpLocalPort.0.0.0.0.34964 = INTEGER: 34964
RFC1213-MIB::udpLocalPort.0.0.0.0.49152 = INTEGER: 49152
RFC1213-MIB::udpLocalPort.0.0.0.0.49153 = INTEGER: 49153
RFC1213-MIB::udpLocalPort.127.0.0.1.12345 = INTEGER: 12345
RFC1213-MIB::udpLocalPort.127.0.0.1.12346 = INTEGER: 12346
SNMPv2-MIB::snmpInPkts.0 = Counter32: 5616
SNMPv2-MIB::snmpOutPkts.0 = Counter32: 5607
SNMPv2-MIB::snmpInBadVersions.0 = Counter32: 0
SNMPv2-MIB::snmpInBadCommunityNames.0 = Counter32: 9
SNMPv2-MIB::snmpInBadCommunityUses.0 = Counter32: 0
SNMPv2-MIB::snmpInASNParseErrs.0 = Counter32: 0
SNMPv2-MIB::snmpInTooBigs.0 = Counter32: 0
SNMPv2-MIB::snmpInNoSuchNames.0 = Counter32: 0
SNMPv2-MIB::snmpInBadValues.0 = Counter32: 0
SNMPv2-MIB::snmpInReadOnlys.0 = Counter32: 0
SNMPv2-MIB::snmpInGenErrs.0 = Counter32: 0
SNMPv2-MIB::snmpInTotalReqVars.0 = Counter32: 5616
SNMPv2-MIB::snmpInTotalSetVars.0 = Counter32: 0
SNMPv2-MIB::snmpInGetRequests.0 = Counter32: 5
SNMPv2-MIB::snmpInGetNexts.0 = Counter32: 5615
SNMPv2-MIB::snmpInSetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpInGetResponses.0 = Counter32: 0
SNMPv2-MIB::snmpInTraps.0 = Counter32: 0
SNMPv2-MIB::snmpOutTooBigs.0 = Counter32: 0
SNMPv2-MIB::snmpOutNoSuchNames.0 = Counter32: 0
SNMPv2-MIB::snmpOutBadValues.0 = Counter32: 0
SNMPv2-MIB::snmpOutGenErrs.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetNexts.0 = Counter32: 0
SNMPv2-MIB::snmpOutSetRequests.0 = Counter32: 0
SNMPv2-MIB::snmpOutGetResponses.0 = Counter32: 5630
SNMPv2-MIB::snmpOutTraps.0 = Counter32: 0
SNMPv2-MIB::snmpEnableAuthenTraps.0 = INTEGER: disabled(2)
SNMPv2-MIB::snmpSilentDrops.0 = Counter32: 0
SNMPv2-MIB::snmpProxyDrops.0 = Counter32: 0
RMON2-MIB::netDefaultGateway.0 = IpAddress: 0.0.0.0
BRIDGE-MIB::dot1dBaseBridgeAddress.0 = STRING: 20:87:56:ff:aa:84
BRIDGE-MIB::dot1dBaseNumPorts.0 = INTEGER: 4 ports
BRIDGE-MIB::dot1dBaseType.0 = INTEGER: transparent-only(2)
BRIDGE-MIB::dot1dBasePort.1 = INTEGER: 1
BRIDGE-MIB::dot1dBasePort.2 = INTEGER: 2
BRIDGE-MIB::dot1dBasePort.3 = INTEGER: 3
BRIDGE-MIB::dot1dBasePort.4 = INTEGER: 4
BRIDGE-MIB::dot1dBasePortIfIndex.1 = INTEGER: 1
BRIDGE-MIB::dot1dBasePortIfIndex.2 = INTEGER: 2
BRIDGE-MIB::dot1dBasePortIfIndex.3 = INTEGER: 3
BRIDGE-MIB::dot1dBasePortIfIndex.4 = INTEGER: 4
BRIDGE-MIB::dot1dBasePortCircuit.1 = OID: SNMPv2-SMI::zeroDotZero
BRIDGE-MIB::dot1dBasePortCircuit.2 = OID: SNMPv2-SMI::zeroDotZero
BRIDGE-MIB::dot1dBasePortCircuit.3 = OID: SNMPv2-SMI::zeroDotZero
BRIDGE-MIB::dot1dBasePortCircuit.4 = OID: SNMPv2-SMI::zeroDotZero
BRIDGE-MIB::dot1dBasePortDelayExceededDiscards.1 = Counter32: 0
BRIDGE-MIB::dot1dBasePortDelayExceededDiscards.2 = Counter32: 0
BRIDGE-MIB::dot1dBasePortDelayExceededDiscards.3 = Counter32: 0
BRIDGE-MIB::dot1dBasePortDelayExceededDiscards.4 = Counter32: 0
BRIDGE-MIB::dot1dBasePortMtuExceededDiscards.1 = Counter32: 0
BRIDGE-MIB::dot1dBasePortMtuExceededDiscards.2 = Counter32: 0
BRIDGE-MIB::dot1dBasePortMtuExceededDiscards.3 = Counter32: 0
BRIDGE-MIB::dot1dBasePortMtuExceededDiscards.4 = Counter32: 0
BRIDGE-MIB::dot1dTpLearnedEntryDiscards.0 = Counter32: 0
BRIDGE-MIB::dot1dTpAgingTime.0 = INTEGER: 30 seconds
BRIDGE-MIB::dot1dTpFdbAddress.'T.u...' = STRING: 54:ee:75:ff:95:a6
BRIDGE-MIB::dot1dTpFdbAddress.'.'....' = STRING: b8:27:eb:a4:b5:ee
BRIDGE-MIB::dot1dTpFdbPort.'T.u...' = INTEGER: 3
BRIDGE-MIB::dot1dTpFdbPort.'.'....' = INTEGER: 2
BRIDGE-MIB::dot1dTpFdbStatus.'T.u...' = INTEGER: learned(3)
BRIDGE-MIB::dot1dTpFdbStatus.'.'....' = INTEGER: learned(3)
BRIDGE-MIB::dot1dTpPort.1 = INTEGER: 1
BRIDGE-MIB::dot1dTpPort.2 = INTEGER: 2
BRIDGE-MIB::dot1dTpPort.3 = INTEGER: 3
BRIDGE-MIB::dot1dTpPort.4 = INTEGER: 4
BRIDGE-MIB::dot1dTpPortMaxInfo.1 = INTEGER: 1486 bytes
BRIDGE-MIB::dot1dTpPortMaxInfo.2 = INTEGER: 1486 bytes
BRIDGE-MIB::dot1dTpPortMaxInfo.3 = INTEGER: 1486 bytes
BRIDGE-MIB::dot1dTpPortMaxInfo.4 = INTEGER: 1486 bytes
BRIDGE-MIB::dot1dTpPortInFrames.1 = Counter32: 8751 frames
BRIDGE-MIB::dot1dTpPortInFrames.2 = Counter32: 1830 frames
BRIDGE-MIB::dot1dTpPortInFrames.3 = Counter32: 6546 frames
BRIDGE-MIB::dot1dTpPortInFrames.4 = Counter32: 0 frames
BRIDGE-MIB::dot1dTpPortOutFrames.1 = Counter32: 13306 frames
BRIDGE-MIB::dot1dTpPortOutFrames.2 = Counter32: 5738 frames
BRIDGE-MIB::dot1dTpPortOutFrames.3 = Counter32: 22510 frames
BRIDGE-MIB::dot1dTpPortOutFrames.4 = Counter32: 0 frames
BRIDGE-MIB::dot1dTpPortInDiscards.1 = Counter32: 0 frames
BRIDGE-MIB::dot1dTpPortInDiscards.2 = Counter32: 0 frames
BRIDGE-MIB::dot1dTpPortInDiscards.3 = Counter32: 0 frames
BRIDGE-MIB::dot1dTpPortInDiscards.4 = Counter32: 0 frames
IF-MIB::ifName.1 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P1
IF-MIB::ifName.2 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P2
IF-MIB::ifName.3 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P3
IF-MIB::ifName.4 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P4
IF-MIB::ifName.1000 = STRING: Siemens, SIMATIC NET, internal, X1
IF-MIB::ifInMulticastPkts.1 = Counter32: 6744
IF-MIB::ifInMulticastPkts.2 = Counter32: 1299
IF-MIB::ifInMulticastPkts.3 = Counter32: 91
IF-MIB::ifInMulticastPkts.4 = Counter32: 0
IF-MIB::ifInMulticastPkts.1000 = Counter32: 0
IF-MIB::ifInBroadcastPkts.1 = Counter32: 1096
IF-MIB::ifInBroadcastPkts.2 = Counter32: 223
IF-MIB::ifInBroadcastPkts.3 = Counter32: 8
IF-MIB::ifInBroadcastPkts.4 = Counter32: 0
IF-MIB::ifInBroadcastPkts.1000 = Counter32: 0
IF-MIB::ifOutMulticastPkts.1 = Counter32: 7239
IF-MIB::ifOutMulticastPkts.2 = Counter32: 5046
IF-MIB::ifOutMulticastPkts.3 = Counter32: 14309
IF-MIB::ifOutMulticastPkts.4 = Counter32: 0
IF-MIB::ifOutMulticastPkts.1000 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.1 = Counter32: 232
IF-MIB::ifOutBroadcastPkts.2 = Counter32: 307
IF-MIB::ifOutBroadcastPkts.3 = Counter32: 1320
IF-MIB::ifOutBroadcastPkts.4 = Counter32: 0
IF-MIB::ifOutBroadcastPkts.1000 = Counter32: 0
IF-MIB::ifHCInOctets.1 = Counter64: 908950
IF-MIB::ifHCInOctets.2 = Counter64: 214979
IF-MIB::ifHCInOctets.3 = Counter64: 605526
IF-MIB::ifHCInOctets.4 = Counter64: 0
IF-MIB::ifHCInOctets.1000 = Counter64: 0
IF-MIB::ifHCInUcastPkts.1 = Counter64: 911
IF-MIB::ifHCInUcastPkts.2 = Counter64: 308
IF-MIB::ifHCInUcastPkts.3 = Counter64: 6501
IF-MIB::ifHCInUcastPkts.4 = Counter64: 0
IF-MIB::ifHCInUcastPkts.1000 = Counter64: 0
IF-MIB::ifHCInMulticastPkts.1 = Counter64: 6744
IF-MIB::ifHCInMulticastPkts.2 = Counter64: 1299
IF-MIB::ifHCInMulticastPkts.3 = Counter64: 91
IF-MIB::ifHCInMulticastPkts.4 = Counter64: 0
IF-MIB::ifHCInMulticastPkts.1000 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.1 = Counter64: 1096
IF-MIB::ifHCInBroadcastPkts.2 = Counter64: 223
IF-MIB::ifHCInBroadcastPkts.3 = Counter64: 8
IF-MIB::ifHCInBroadcastPkts.4 = Counter64: 0
IF-MIB::ifHCInBroadcastPkts.1000 = Counter64: 0
IF-MIB::ifHCOutOctets.1 = Counter64: 1516677
IF-MIB::ifHCOutOctets.2 = Counter64: 597260
IF-MIB::ifHCOutOctets.3 = Counter64: 2274335
IF-MIB::ifHCOutOctets.4 = Counter64: 0
IF-MIB::ifHCOutOctets.1000 = Counter64: 0
IF-MIB::ifHCOutUcastPkts.1 = Counter64: 5835
IF-MIB::ifHCOutUcastPkts.2 = Counter64: 385
IF-MIB::ifHCOutUcastPkts.3 = Counter64: 6955
IF-MIB::ifHCOutUcastPkts.4 = Counter64: 0
IF-MIB::ifHCOutUcastPkts.1000 = Counter64: 0
IF-MIB::ifHCOutMulticastPkts.1 = Counter64: 7239
IF-MIB::ifHCOutMulticastPkts.2 = Counter64: 5046
IF-MIB::ifHCOutMulticastPkts.3 = Counter64: 14309
IF-MIB::ifHCOutMulticastPkts.4 = Counter64: 0
IF-MIB::ifHCOutMulticastPkts.1000 = Counter64: 0
IF-MIB::ifHCOutBroadcastPkts.1 = Counter64: 232
IF-MIB::ifHCOutBroadcastPkts.2 = Counter64: 307
IF-MIB::ifHCOutBroadcastPkts.3 = Counter64: 1320
IF-MIB::ifHCOutBroadcastPkts.4 = Counter64: 0
IF-MIB::ifHCOutBroadcastPkts.1000 = Counter64: 0
IF-MIB::ifLinkUpDownTrapEnable.1 = INTEGER: disabled(2)
IF-MIB::ifLinkUpDownTrapEnable.2 = INTEGER: disabled(2)
IF-MIB::ifLinkUpDownTrapEnable.3 = INTEGER: disabled(2)
IF-MIB::ifLinkUpDownTrapEnable.4 = INTEGER: disabled(2)
IF-MIB::ifLinkUpDownTrapEnable.1000 = INTEGER: disabled(2)
IF-MIB::ifHighSpeed.1 = Gauge32: 10000000
IF-MIB::ifHighSpeed.2 = Gauge32: 100000000
IF-MIB::ifHighSpeed.3 = Gauge32: 100000000
IF-MIB::ifHighSpeed.4 = Gauge32: 10000000
IF-MIB::ifHighSpeed.1000 = Gauge32: 0
IF-MIB::ifPromiscuousMode.1 = INTEGER: false(2)
IF-MIB::ifPromiscuousMode.2 = INTEGER: false(2)
IF-MIB::ifPromiscuousMode.3 = INTEGER: false(2)
IF-MIB::ifPromiscuousMode.4 = INTEGER: false(2)
IF-MIB::ifPromiscuousMode.1000 = INTEGER: false(2)
IF-MIB::ifConnectorPresent.1 = INTEGER: true(1)
IF-MIB::ifConnectorPresent.2 = INTEGER: true(1)
IF-MIB::ifConnectorPresent.3 = INTEGER: true(1)
IF-MIB::ifConnectorPresent.4 = INTEGER: true(1)
IF-MIB::ifConnectorPresent.1000 = INTEGER: false(2)
IF-MIB::ifAlias.1 = STRING:
IF-MIB::ifAlias.2 = STRING:
IF-MIB::ifAlias.3 = STRING:
IF-MIB::ifAlias.4 = STRING:
IF-MIB::ifAlias.1000 = STRING:
IF-MIB::ifCounterDiscontinuityTime.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifCounterDiscontinuityTime.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifCounterDiscontinuityTime.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifCounterDiscontinuityTime.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifCounterDiscontinuityTime.1000 = Timeticks: (0) 0:00:00.00
IF-MIB::ifStackStatus.0.1000 = INTEGER: active(1)
IF-MIB::ifStackStatus.1.0 = INTEGER: active(1)
IF-MIB::ifStackStatus.2.0 = INTEGER: active(1)
IF-MIB::ifStackStatus.3.0 = INTEGER: active(1)
IF-MIB::ifStackStatus.4.0 = INTEGER: active(1)
IF-MIB::ifStackStatus.1000.1 = INTEGER: active(1)
IF-MIB::ifStackStatus.1000.2 = INTEGER: active(1)
IF-MIB::ifStackStatus.1000.3 = INTEGER: active(1)
IF-MIB::ifStackStatus.1000.4 = INTEGER: active(1)
IF-MIB::ifRcvAddressStatus.1000 = INTEGER: active(1)
IF-MIB::ifRcvAddressType.1000 = INTEGER: nonVolatile(3)
IF-MIB::ifTableLastChange.0 = Timeticks: (0) 0:00:00.00
IF-MIB::ifStackLastChange.0 = Timeticks: (0) 0:00:00.00

and the LLDP subtree:

$ snmpwalk -v2c -c public -m ALL 192.168.0.99 LLDP-MIB::lldpMIB
LLDP-MIB::lldpMessageTxInterval.0 = INTEGER: 5 seconds
LLDP-MIB::lldpMessageTxHoldMultiplier.0 = INTEGER: 4
LLDP-MIB::lldpReinitDelay.0 = INTEGER: 1 seconds
LLDP-MIB::lldpTxDelay.0 = INTEGER: 1 seconds
LLDP-MIB::lldpPortConfigAdminStatus.1 = INTEGER: txAndRx(3)
LLDP-MIB::lldpPortConfigAdminStatus.2 = INTEGER: txAndRx(3)
LLDP-MIB::lldpPortConfigAdminStatus.3 = INTEGER: txAndRx(3)
LLDP-MIB::lldpPortConfigAdminStatus.4 = INTEGER: txAndRx(3)
LLDP-MIB::lldpPortConfigNotificationEnable.1 = INTEGER: false(2)
LLDP-MIB::lldpPortConfigNotificationEnable.2 = INTEGER: false(2)
LLDP-MIB::lldpPortConfigNotificationEnable.3 = INTEGER: false(2)
LLDP-MIB::lldpPortConfigNotificationEnable.4 = INTEGER: false(2)
LLDP-MIB::lldpPortConfigTLVsTxEnable.1 = BITS: F0 portDesc(0) sysName(1) sysDesc(2) sysCap(3)
LLDP-MIB::lldpPortConfigTLVsTxEnable.2 = BITS: F0 portDesc(0) sysName(1) sysDesc(2) sysCap(3)
LLDP-MIB::lldpPortConfigTLVsTxEnable.3 = BITS: F0 portDesc(0) sysName(1) sysDesc(2) sysCap(3)
LLDP-MIB::lldpPortConfigTLVsTxEnable.4 = BITS: F0 portDesc(0) sysName(1) sysDesc(2) sysCap(3)
LLDP-MIB::lldpConfigManAddrPortsTxEnable.ipV4."...c" = Hex-STRING: F0
LLDP-MIB::lldpStatsRemTablesLastChangeTime.0 = Timeticks: (1200) 0:00:12.00
LLDP-MIB::lldpStatsRemTablesInserts.0 = Gauge32: 2 table entries
LLDP-MIB::lldpStatsRemTablesDeletes.0 = Gauge32: 0 table entries
LLDP-MIB::lldpStatsRemTablesDrops.0 = Gauge32: 0 table entries
LLDP-MIB::lldpStatsRemTablesAgeouts.0 = Gauge32: 0
LLDP-MIB::lldpStatsTxPortFramesTotal.1 = Counter32: 1072
LLDP-MIB::lldpStatsTxPortFramesTotal.2 = Counter32: 1072
LLDP-MIB::lldpStatsTxPortFramesTotal.3 = Counter32: 1072
LLDP-MIB::lldpStatsTxPortFramesTotal.4 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesDiscardedTotal.1 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesDiscardedTotal.2 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesDiscardedTotal.3 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesDiscardedTotal.4 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesErrors.1 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesErrors.2 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesErrors.3 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesErrors.4 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesTotal.1 = Counter32: 669
LLDP-MIB::lldpStatsRxPortFramesTotal.2 = Counter32: 1073
LLDP-MIB::lldpStatsRxPortFramesTotal.3 = Counter32: 0
LLDP-MIB::lldpStatsRxPortFramesTotal.4 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsDiscardedTotal.1 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsDiscardedTotal.2 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsDiscardedTotal.3 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsDiscardedTotal.4 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsUnrecognizedTotal.1 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsUnrecognizedTotal.2 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsUnrecognizedTotal.3 = Counter32: 0
LLDP-MIB::lldpStatsRxPortTLVsUnrecognizedTotal.4 = Counter32: 0
LLDP-MIB::lldpStatsRxPortAgeoutsTotal.1 = Gauge32: 0
LLDP-MIB::lldpStatsRxPortAgeoutsTotal.2 = Gauge32: 0
LLDP-MIB::lldpStatsRxPortAgeoutsTotal.3 = Gauge32: 0
LLDP-MIB::lldpStatsRxPortAgeoutsTotal.4 = Gauge32: 0
LLDP-MIB::lldpLocChassisIdSubtype.0 = INTEGER: local(7)
LLDP-MIB::lldpLocChassisId.0 = STRING: "b"
LLDP-MIB::lldpLocSysName.0 = STRING: sysName Not Set
LLDP-MIB::lldpLocSysDesc.0 = STRING: Siemens, SIMATIC NET, SCALANCE X204IRT, 6GK5 204-0BA00-2BA3, HW: Version 9, FW: Version V05.04.02, SVPL6147920
LLDP-MIB::lldpLocSysCapSupported.0 = BITS: 01 stationOnly(7)
LLDP-MIB::lldpLocSysCapEnabled.0 = BITS: 01 stationOnly(7)
LLDP-MIB::lldpLocPortIdSubtype.1 = INTEGER: local(7)
LLDP-MIB::lldpLocPortIdSubtype.2 = INTEGER: local(7)
LLDP-MIB::lldpLocPortIdSubtype.3 = INTEGER: local(7)
LLDP-MIB::lldpLocPortIdSubtype.4 = INTEGER: local(7)
LLDP-MIB::lldpLocPortId.1 = STRING: "port-001"
LLDP-MIB::lldpLocPortId.2 = STRING: "port-002"
LLDP-MIB::lldpLocPortId.3 = STRING: "port-003"
LLDP-MIB::lldpLocPortId.4 = STRING: "port-004"
LLDP-MIB::lldpLocPortDesc.1 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P1
LLDP-MIB::lldpLocPortDesc.2 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P2
LLDP-MIB::lldpLocPortDesc.3 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P3
LLDP-MIB::lldpLocPortDesc.4 = STRING: Siemens, SIMATIC NET, Ethernet Port, X1 P4
LLDP-MIB::lldpLocManAddrLen.ipV4."...c" = INTEGER: 5
LLDP-MIB::lldpLocManAddrIfSubtype.ipV4."...c" = INTEGER: ifIndex(2)
LLDP-MIB::lldpLocManAddrIfId.ipV4."...c" = INTEGER: 1000
LLDP-MIB::lldpLocManAddrOID.ipV4."...c" = OID: SNMPv2-SMI::enterprises.24686
LLDP-MIB::lldpRemChassisIdSubtype.400.2.2 = INTEGER: local(7)
LLDP-MIB::lldpRemChassisIdSubtype.1200.1.1 = INTEGER: local(7)
LLDP-MIB::lldpRemChassisId.400.2.2 = STRING: "3S PN-Controller          1103000032           0000000010a4b5ee     0 V  1  0  0"
LLDP-MIB::lldpRemChassisId.1200.1.1 = STRING: "(REMOVED)"
LLDP-MIB::lldpRemPortIdSubtype.400.2.2 = INTEGER: local(7)
LLDP-MIB::lldpRemPortIdSubtype.1200.1.1 = INTEGER: local(7)
LLDP-MIB::lldpRemPortId.400.2.2 = STRING: "port-001.controller"
LLDP-MIB::lldpRemPortId.1200.1.1 = STRING: "port-001"
LLDP-MIB::lldpRemSysName.1200.1.1 = STRING: (REMOVED)
LLDP-MIB::lldpRemSysDesc.1200.1.1 = STRING: (REMOVED)
LLDP-MIB::lldpRemSysCapSupported.1200.1.1 = BITS: 01 stationOnly(7)
LLDP-MIB::lldpRemSysCapEnabled.1200.1.1 = BITS: 01 stationOnly(7)
LLDP-MIB::lldpRemManAddrIfSubtype.400.2.2.ipV4."...d" = INTEGER: systemPortNumber(3)
LLDP-MIB::lldpRemManAddrIfSubtype.1200.1.1.ipV4."...." = INTEGER: ifIndex(2)
LLDP-MIB::lldpRemManAddrIfId.400.2.2.ipV4."...d" = INTEGER: 1
LLDP-MIB::lldpRemManAddrIfId.1200.1.1.ipV4."...." = INTEGER: 1
LLDP-MIB::lldpRemManAddrOID.1200.1.1.ipV4."...." = OID: SNMPv2-SMI::enterprises.24686
LLDP-EXT-PNO-MIB::lldpXPnoConfigSPDTxEnable.1 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigSPDTxEnable.2 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigSPDTxEnable.3 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigSPDTxEnable.4 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPortStatusTxEnable.1 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPortStatusTxEnable.2 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPortStatusTxEnable.3 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPortStatusTxEnable.4 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigAliasTxEnable.1 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigAliasTxEnable.2 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigAliasTxEnable.3 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigAliasTxEnable.4 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigMrpTxEnable.1 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigMrpTxEnable.2 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigMrpTxEnable.3 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigMrpTxEnable.4 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPtcpTxEnable.1 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPtcpTxEnable.2 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPtcpTxEnable.3 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoConfigPtcpTxEnable.4 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocLPDValue.1 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocLPDValue.2 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocLPDValue.3 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocLPDValue.4 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortTxDValue.1 = Gauge32: 1123 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortTxDValue.2 = Gauge32: 1123 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortTxDValue.3 = Gauge32: 1123 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortTxDValue.4 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRxDValue.1 = Gauge32: 444 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRxDValue.2 = Gauge32: 444 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRxDValue.3 = Gauge32: 444 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRxDValue.4 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT2.1 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT2.2 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT2.3 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT2.4 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3.1 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3.2 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3.3 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3.4 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortNoS.1 = STRING: b
LLDP-EXT-PNO-MIB::lldpXPnoLocPortNoS.2 = STRING: b
LLDP-EXT-PNO-MIB::lldpXPnoLocPortNoS.3 = STRING: b
LLDP-EXT-PNO-MIB::lldpXPnoLocPortNoS.4 = STRING: b
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrpUuId.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrpUuId.2 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrpUuId.3 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrpUuId.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrrtStatus.1 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrrtStatus.2 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrrtStatus.3 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortMrrtStatus.4 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpMaster.1 = STRING: 0:0:0:0:0:0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpMaster.2 = STRING: 0:0:0:0:0:0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpMaster.3 = STRING: 0:0:0:0:0:0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpMaster.4 = STRING: 0:0:0:0:0:0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpSubdomainUUID.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpSubdomainUUID.2 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpSubdomainUUID.3 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpSubdomainUUID.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpIRDataUUID.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpIRDataUUID.2 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpIRDataUUID.3 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPtcpIRDataUUID.4 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoLocPortModeRT3.1 = INTEGER: standard(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortModeRT3.2 = INTEGER: standard(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortModeRT3.3 = INTEGER: standard(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortModeRT3.4 = INTEGER: standard(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodLength.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 1000000
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodLength.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 1000000
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodLength.3 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 1000000
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodLength.4 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 1000000
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodValidity.1 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodValidity.2 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodValidity.3 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortPeriodValidity.4 = INTEGER: true(1)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedOffset.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedOffset.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedOffset.3 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedOffset.4 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedValidity.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedValidity.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedValidity.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortRedValidity.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeOffset.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeOffset.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeOffset.3 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeOffset.4 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeValidity.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeValidity.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeValidity.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortOrangeValidity.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenOffset.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenOffset.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenOffset.3 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenOffset.4 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenValidity.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenValidity.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenValidity.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortGreenValidity.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3OptimizationSupported.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3OptimizationSupported.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3OptimizationSupported.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3OptimizationSupported.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShorteningSupported.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShorteningSupported.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShorteningSupported.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShorteningSupported.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShortening.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShortening.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShortening.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3PreambleShortening.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3FragmentationSupported.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3FragmentationSupported.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3FragmentationSupported.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3FragmentationSupported.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3Fragmentation.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3Fragmentation.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3Fragmentation.3 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoLocPortStatusRT3Fragmentation.4 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemLPDValue.400.2.2 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoRemLPDValue.1200.1.1 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoRemPortTxDValue.400.2.2 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoRemPortTxDValue.1200.1.1 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoRemPortRxDValue.400.2.2 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoRemPortRxDValue.1200.1.1 = Gauge32: 0 ns
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT2.400.2.2 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT2.1200.1.1 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3.400.2.2 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3.1200.1.1 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortNoS.400.2.2 = STRING: controller
LLDP-EXT-PNO-MIB::lldpXPnoRemPortNoS.1200.1.1 = STRING: (REMOVED)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortMrpUuId.400.2.2 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoRemPortMrpUuId.1200.1.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoRemPortMrrtStatus.400.2.2 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortMrrtStatus.1200.1.1 = INTEGER: off(0)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPtcpMaster.400.2.2 = STRING: 0:0:0:0:0:0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPtcpMaster.1200.1.1 = STRING: 0:0:0:0:0:0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPtcpSubdomainUUID.400.2.2 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPtcpSubdomainUUID.1200.1.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPtcpIRDataUUID.400.2.2 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPtcpIRDataUUID.1200.1.1 = Hex-STRING: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
LLDP-EXT-PNO-MIB::lldpXPnoRemPortModeRT3.400.2.2 = INTEGER: standard(1)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortModeRT3.1200.1.1 = INTEGER: standard(1)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPeriodLength.400.2.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPeriodLength.1200.1.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPeriodValidity.400.2.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortPeriodValidity.1200.1.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortRedOffset.400.2.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortRedOffset.1200.1.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortRedValidity.400.2.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortRedValidity.1200.1.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortOrangeOffset.400.2.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortOrangeOffset.1200.1.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortOrangeValidity.400.2.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortOrangeValidity.1200.1.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortGreenOffset.400.2.2 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortGreenOffset.1200.1.1 = Wrong Type (should be Gauge32 or Unsigned32): INTEGER: 0
LLDP-EXT-PNO-MIB::lldpXPnoRemPortGreenValidity.400.2.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortGreenValidity.1200.1.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3PreambleShortening.400.2.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3PreambleShortening.1200.1.1 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3Fragmentation.400.2.2 = INTEGER: false(2)
LLDP-EXT-PNO-MIB::lldpXPnoRemPortStatusRT3Fragmentation.1200.1.1 = INTEGER: false(2)
LLDP-MIB::lldpExtensions.4623.1.1.1.1.1.1 = Hex-STRING: F0
LLDP-MIB::lldpExtensions.4623.1.1.1.1.1.2 = Hex-STRING: F0
LLDP-MIB::lldpExtensions.4623.1.1.1.1.1.3 = Hex-STRING: F0
LLDP-MIB::lldpExtensions.4623.1.1.1.1.1.4 = Hex-STRING: F0
LLDP-MIB::lldpExtensions.4623.1.2.1.1.1.1 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.1.2 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.1.3 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.1.4 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.2.1 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.2.2 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.2.3 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.2.4 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.2.1.1.3.1 = Hex-STRING: FF 00
LLDP-MIB::lldpExtensions.4623.1.2.1.1.3.2 = Hex-STRING: FF 00
LLDP-MIB::lldpExtensions.4623.1.2.1.1.3.3 = Hex-STRING: FF 00
LLDP-MIB::lldpExtensions.4623.1.2.1.1.3.4 = Hex-STRING: FF 00
LLDP-MIB::lldpExtensions.4623.1.2.1.1.4.1 = INTEGER: 16
LLDP-MIB::lldpExtensions.4623.1.2.1.1.4.2 = INTEGER: 16
LLDP-MIB::lldpExtensions.4623.1.2.1.1.4.3 = INTEGER: 16
LLDP-MIB::lldpExtensions.4623.1.2.1.1.4.4 = INTEGER: 0
LLDP-MIB::lldpExtensions.4623.1.2.3.1.1.1 = Hex-STRING: 00
LLDP-MIB::lldpExtensions.4623.1.2.3.1.1.2 = Hex-STRING: 00
LLDP-MIB::lldpExtensions.4623.1.2.3.1.1.3 = Hex-STRING: 00
LLDP-MIB::lldpExtensions.4623.1.2.3.1.1.4 = Hex-STRING: 00
LLDP-MIB::lldpExtensions.4623.1.2.3.1.2.1 = INTEGER: 0
LLDP-MIB::lldpExtensions.4623.1.2.3.1.2.2 = INTEGER: 0
LLDP-MIB::lldpExtensions.4623.1.2.3.1.2.3 = INTEGER: 0
LLDP-MIB::lldpExtensions.4623.1.2.3.1.2.4 = INTEGER: 0
LLDP-MIB::lldpExtensions.4623.1.2.4.1.1.1 = INTEGER: 1522
LLDP-MIB::lldpExtensions.4623.1.2.4.1.1.2 = INTEGER: 1522
LLDP-MIB::lldpExtensions.4623.1.2.4.1.1.3 = INTEGER: 1522
LLDP-MIB::lldpExtensions.4623.1.2.4.1.1.4 = INTEGER: 1522
LLDP-MIB::lldpExtensions.4623.1.3.1.1.1.400.2.2 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.3.1.1.1.1200.1.1 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.3.1.1.2.400.2.2 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.3.1.1.2.1200.1.1 = INTEGER: 1
LLDP-MIB::lldpExtensions.4623.1.3.1.1.3.400.2.2 = Hex-STRING: 6C 00
LLDP-MIB::lldpExtensions.4623.1.3.1.1.3.1200.1.1 = Hex-STRING: EC 03
LLDP-MIB::lldpExtensions.4623.1.3.1.1.4.400.2.2 = INTEGER: 16
LLDP-MIB::lldpExtensions.4623.1.3.1.1.4.1200.1.1 = INTEGER: 30
LLDP-MIB::lldpExtensions.32962.1.1.1.1.1.1 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.1.1.1.2 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.1.1.1.3 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.1.1.1.4 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.2.1.1.1.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.2.1.1.2.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.2.1.1.3.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.2.1.1.4.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.3.1.1.1.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.3.1.1.2.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.3.1.1.3.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.3.1.1.4.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.4.1.1.1.1 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.4.1.1.2.1 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.4.1.1.3.1 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.1.4.1.1.4.1 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.1.1.1.1 = INTEGER: 0
LLDP-MIB::lldpExtensions.32962.1.2.1.1.1.2 = INTEGER: 0
LLDP-MIB::lldpExtensions.32962.1.2.1.1.1.3 = INTEGER: 0
LLDP-MIB::lldpExtensions.32962.1.2.1.1.1.4 = INTEGER: 0
LLDP-MIB::lldpExtensions.32962.1.2.2.1.2.1.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.2.2.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.2.3.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.2.4.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.3.1.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.3.2.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.3.3.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.2.2.1.3.4.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.3.1.1.1.400.2.2 = INTEGER: 0
LLDP-MIB::lldpExtensions.32962.1.3.1.1.1.1200.1.1 = INTEGER: 0
LLDP-MIB::lldpExtensions.32962.1.3.2.1.2.400.2.2.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.3.2.1.2.1200.1.1.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.3.2.1.3.400.2.2.0 = INTEGER: 2
LLDP-MIB::lldpExtensions.32962.1.3.2.1.3.1200.1.1.0 = INTEGER: 2